Hi Everybody!!
Can someone tell me how can I hook up an opcional interior neon lights 12 volts on my car to works with his lights? this lights doesn't come with the cigarrete lighter plug in,they have only two wire(I already tried to hook them up directly with my lights but there is a noise when I turn them on.
Thank You
Hi sador, connect the negative trigger lead of your interior lights to terminal #85 of an SPDT relay, connect #86 and #87 to a constant 12V+ source (battery), connect #30 to the positive lead of your neon lights and connect the negative lead of the lights to the vehicle's chassis.
If you have a positive trigger lead instead of a negative trigger lead, connect it to terminal #85, connect #86 to ground, connect #87 to a constant 12V+ source (battery), connect #30 to the positive lead of your neon lights and connect the negative lead of the lights to the vehicle's chassis.
the12volt
Thank 12 Volt but I tried that and it works but I heard a noise when I turn it on,the same noise when I tried directly with my interior lights.
i just did this with my van. i am not sure what you are trying to do, but i ran a wire from the positive terminal on my batt. to a switch(like the kind that you put in your house ... i just put it in a little box that you can also buy at the same hardware store. this is so i can manually switch it in or off.) then from the switch to the power wire on my lights. then, i just grounded out to the frame. cost only forty bucks, good luck.
-------------
-B
you dont have to be a radical to be a revolutionary.