Print Page | Close Window

infinity kappa component wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128268
Printed Date: June 30, 2025 at 3:04 AM


Topic: infinity kappa component wiring

Posted By: wyfan4ever
Subject: infinity kappa component wiring
Date Posted: August 16, 2011 at 7:05 PM

Hi there

i'm a new member & probably have the simplest question to ask

I have a infinity kappa component system (680.9cs) with the passive crossover, how do I hook this up to my head unit?

I have a tweeter & 5x7 that came with the system.  do I need to have 6 speakers for the system (larger woofers in the back)?

I was going to put the front wires from the head unit to the crossover, and out of that come the tweeters & the 5x7's right?  what happens to the rear wires from the head unit, are they not used?

this is going into a street rod (albeit you prob. won't hear the system over this old rumbling car), I was looking for a simple system with no amp installation planned.

Thanks for any help




Replies:

Posted By: i am an idiot
Date Posted: August 16, 2011 at 8:22 PM
If you do not have rear speakers, just insulate the rear wires so they do not touch anything.

You are correct on the radio to crossover to speakers wiring.



Posted By: wyfan4ever
Date Posted: August 17, 2011 at 8:31 PM
Thanks for the info, i'll be running wires this weekend.


Print Page | Close Window