Print Page | Close Window

Reciever way too hot

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1451
Printed Date: September 11, 2025 at 3:06 AM


Topic: Reciever way too hot

Posted By: ih8u37
Subject: Reciever way too hot
Date Posted: June 23, 2002 at 5:07 PM

Alright, here's my issue. I have a Pioneer DEH-6000 CD reciever that, when pushed hard for a few minutes, gets extremely hot to the touch. The back of the reciever gets so hot, it will literally leave burn marks if you leave a finger on it. Even the disc is hot when it's ejected.

It's wired correctly, using an aftermarket wiring harness (I've had it checked by a professional). The only out-of-the-ordinary aspect of the wiring is the fact that the remote turn-on lead going out to the amplifier is connected to two amps, & an EQ. Is there any way possible this could cause the overheating? Would connecting a relay to it fix the problem? Thanx in advance.




Replies:

Posted By: bberman1
Date Posted: June 23, 2002 at 6:05 PM
You might want to talk to Pioneer and ask them if it’s normal for the unit to get that hot. A remote wire running the 2 AMP’s and an EQ won’t cause the head to get hot. You don’t need a relay at this time, but if you add any more devices then install a relay



Posted By: patrick
Date Posted: June 26, 2002 at 12:07 PM
SOUNDS LIKE YOU HAVE AN INTERNAL PROBLEM

-------------
###&&&


Print Page | Close Window