mach sound system interface

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=277
Printed Date: July 22, 2025 at 1:53 AM

Topic: mach sound system interface

Posted By: FullForce
Subject: mach sound system interface
Date Posted: April 09, 2002 at 11:36 PM

What do you need to add an aftermarket amp to an Explorer with the Mach system? What about adding an aftermarket radio? Is there any software or other info that tells you these things about cars?

Replies:

Posted By: the12volt
Date Posted: April 10, 2002 at 10:54 AM

Hi FullForce, Peripheral makes interfaces that will allow you to add an amplifier or use an aftermarket head unit. You can view the applications here: https://peripheralelectronics.com/periph_products/line_output_convert.htm

-------------
posted_image

the12volt • Support the12volt.com

Posted By: mobiletoys2002
Date Posted: April 13, 2002 at 8:11 PM

ok i just finished one of these cars ok well i can tell u were the amp is and how to bypass it and if you plan on runing amp and radio thats easy alls you gotta do is im gonna asuume u will amplify the fronts using an amp but here goes the factory amp is located in the right rear kick panel you will need to take the seat belt off it has a verry large torx a t 50 soket youwill need then you get the screws off in the back panel and pop itr out you will see the amp a little silver box well if you plan on doing the entire system then reply and i can tell u wire colors for the factory locations and anything else you need to know about that car i have it all written down

Posted By: mobiletoys2002
Date Posted: April 13, 2002 at 8:15 PM

also what year is the car and does it have a factory sub ?not all machs systems do