clifford virtual key manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136081
Printed Date: September 13, 2025 at 4:01 PM

Topic: clifford virtual key manual

Posted By: aladinsain
Subject: clifford virtual key manual
Date Posted: February 17, 2014 at 6:22 AM

Hi Guys i really need your help with this as i cannot get my car started the spare torpedo that i have will not program the immobilizer so i need to take it out completely i have traced the wires as far back as i can but cannot seem to find where they are chased in there is 2 relays on it one for the fuel pump and one for the starter motor i think see image any help would be appreciated posted_image

Replies:

Posted By: harryharris
Date Posted: February 17, 2014 at 12:35 PM

Two blacks to ground (UK = earth).
One back fused to constant 12V+
One possibly fused to ignition (not too sure if that one is there)
Two wires on your ignition loom will have been cut, rejoin.

-------------
Test before boxing up.

Posted By: aladinsain
Date Posted: February 18, 2014 at 6:18 AM

is possible to identify from p6 p8 p4 ect also are the ground wires silver colored wires and the copper colored wires live ?

Posted By: harryharris
Date Posted: February 18, 2014 at 7:18 AM

Nope it's about 15 years since I installed one of these, trace the wiring, rewire the breaks remove and forget.

-------------
Test before boxing up.

Posted By: aladinsain
Date Posted: February 18, 2014 at 11:12 AM

Hi Harry have sorted it with the info you gave me thank you very much

Posted By: harryharris
Date Posted: February 18, 2014 at 11:13 AM

Pleasure.

-------------
Test before boxing up.

Print Page | Close Window