Compustar led, - when armed?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143927
Printed Date: September 09, 2025 at 11:38 PM
Topic: Compustar led, - when armed?
Posted By: keenxxx
Subject: Compustar led, - when armed?
Date Posted: December 22, 2017 at 11:04 AM
In the process of installing a Compustar CM 7000. I would like to run 1 super bright blue LED or 2 if a separate ground while armed output is available. Anyone know if the Compustar will handle a single bright blue led or if the system has a ground when armed output? Thanks.
Replies:
Posted By: geepherder
Date Posted: December 22, 2017 at 5:17 PM
If your load is expected to draw more than 250 mA, use the GWA wire to trigger a relay, then use an appropriate series resistor.
-------------
My ex once told me I have a perfect face for radio.
Posted By: howie ll
Date Posted: December 23, 2017 at 4:05 AM
Or use a latching relay from the lock wire; a normal relay will drain the battery.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|