Viper 5305, 9 Parking Light Flashes
      Printed From: the12volt.com
       Forum Name:  Car Security and Convenience
       Forum Discription:  Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
       URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145155
       Printed Date: November 04, 2025 at 10:03 AM
      
 
  
      Topic: Viper 5305, 9 Parking Light Flashes
      
  
      Posted By: davep.
       Subject: Viper 5305, 9 Parking Light Flashes
       Date Posted: January 13, 2019 at 12:25 AM
      
  
      This system is jinxed. The original install goes back 12 years, but I upgraded it to the 5305 about 2 years ago. Every now and then something just doesn't work right, or quits. The Aux-6 output quit working last summer. No biggie for now.
 
 The R/S has always worked fine. The truck has sat for 3-1/2 months. Today when I activate R/S I get NINE Park Light flashes. It doesn't even try to R/S. I can't find anything in my Viper downloads (6 years worth) about Nine park light flashes. (9 flashes for a shut down is Low Voltage. But that's on the LED. I haven't checked the shutdown diagnostic, because it doesn't even try to R/S.) I've made it do it at least a dozen times. Always (9) Park Light Flashes. It started just fine and normally with the key. There's nothing wrong with the truck. It just sat under its cover for 3-1/2 months, with its onboard battery charger plugged in.
 
 What does (9) Park light flashes mean? Thanks.
 
 1999 F250 Super Duty Diesel. 
      
 
  Replies: 
       
       
      Posted By: geepherder
       
      Date Posted: January 13, 2019 at 6:01 AM
       
      I didn't find anything for 9 flashes, but I'd do shutdown diagnostics.
 
 Does your system have a toggle switch to turn off remote start?  If so, check to make sure it's on.
 
 Otherwise, 8 flashes on the LED is "wait-to-start" input timed out.
  ------------- My ex once told me I have a perfect face for radio. 
       
       
       
      
       
      Posted By: davep.
       
      Date Posted: January 13, 2019 at 12:44 PM
       
      Ok, Thank You. It isn't raining today, I'll mess with it a little. I DO have a toggle switch to deactivate the R/S. I'll check that too. Thanks again. 
       
       
       
      
       
      Posted By: davep.
       
      Date Posted: January 13, 2019 at 7:00 PM
       
      9 Flashes is Valet Mode. 9 quick flashes when it goes IN to Valet, 9 Long flashes when it comes OUT. It won't R/S in Valet Mode, it gives the quick-9 to indicate that it is IN Valet Mode. 
 
 A: Nothing in my documentation for this series says anything about Valet Mode and the 9 flashes. 
 B: I don't recall putting the system into Valet Mode, although I know how to do it with the button. I normally don't arm the system when its in my yard, but I may have inadvertently put it in Valet while trying to deactivate Zone 2 so it wouldn't false alarm, but I could arm it to activate my GWA protections. I don't remember what I did 3 months ago, but attempting to pull shutdown diagnostics revealed the Valet deal. Thanks for the suggestion.
 
 Live and learn. Another mystery solved. Thanks for reading. 
       
       
       
      
       
      Posted By: geepherder
       
      Date Posted: January 13, 2019 at 10:07 PM
       
      That's good to know.  I recently got a 5305v on Crutchfield, so I'll keep it in mind.
  ------------- My ex once told me I have a perfect face for radio. 
       
       
       
      
     |