Viper 4806v Low Voltage Settings
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146222
Printed Date: July 05, 2025 at 3:34 AM
Topic: Viper 4806v Low Voltage Settings
Posted By: sdynak
Subject: Viper 4806v Low Voltage Settings
Date Posted: May 22, 2020 at 2:47 PM
Happy Memorial Day Weekend folks and I hope all are staying safe.
I was wondering if anyone has actually witnessed the smart start settings work on Directed remote start systems that have the feature such as the 4806v when the voltage drops to the set value.
Default is 10.5v which is very low and maybe why it does not seem to work with default settings. I do have a bitwriter and have not played with it enough myself to the point where I have seen it work yet and don't want to push batteries intentionally low.
Was just wondering if someone has some experience with this and if it really works. I think this is somewhat a concern at default if someone keeps their vehicle in a garage.
Any thoughts?
Thanks & stay safe
I was wondering if anyone has actually witnessed the smart start settings work on Directed remote start systems that have the feature such as the 4806v when the voltage drops to the set value.
Default is 10.5v which is very low and maybe why it does not seem to work with default settings. I do have a bitwriter and have not played with it enough myself to the point where I have seen it work yet and don't want to push batteries intentionally low.
Was just wondering if someone has some experience with this and if it really works. I think this is somewhat a concern at default if someone keeps their vehicle in a garage.
Any thoughts?
Thanks & stay safe