Print Page | Close Window

1997 Dodge Ram 2500, Adding 451M, Unlock Doesn’t Work

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148367
Printed Date: June 28, 2025 at 9:10 PM


Topic: 1997 Dodge Ram 2500, Adding 451M, Unlock Doesn’t Work

Posted By: mike450136
Subject: 1997 Dodge Ram 2500, Adding 451M, Unlock Doesn’t Work
Date Posted: May 24, 2025 at 10:23 AM

The switches inside still continue to work.

I got the lock button to function on the key fob but not unlock

Wired the 451m according to what was listed in the manual :
"wiring diagram c directly wired reversing polarity switch circuits."

I chose to wire the banvie as a negative trigger

As far as I understand it that's how it should be set up.but it doesn't unlock...

Banvie:
https://m.media-amazon.com/images/I/81zuLnf5aqL._AC_UF894,1000_QL80_.jpg

451m:
https://pdf.ampire.de/directed/451M_Installation_Guide_2451111.pdf



Replies:

Posted By: lee.lopez
Date Posted: May 24, 2025 at 9:08 PM
Have you tested and verified an unlock output from your Banvie unit?




Posted By: mike450136
Date Posted: May 25, 2025 at 10:48 AM
I had mistakenly tied into the orange/violet wire and the pink/violet wire and this must have put me in between the switches. I now am tied into the orange/black wire and the pink/black wire so now I'm in between the passenger switch and the motor. But it still didn't work. I swapped out the banvie unit out of another truck and low and behold it works! Thank you😁 I must have fried my banvie before I got the 451m




Posted By: mike450136
Date Posted: May 25, 2025 at 11:32 AM
Oops seems I've jumped the gun. only the driver side gets unlocked with the key fob not the passenger side




Posted By: mike450136
Date Posted: May 25, 2025 at 1:18 PM
Okay so I've tried wiring the Banvie and the 451m relay to the passenger side and now the passenger side works with a 30 amp fuse. driver's side does not work. it seems to have less power wired on the passenger side




Posted By: mike450136
Date Posted: May 25, 2025 at 3:31 PM
Okay got it fixed.The orange/voilet and pink violet on the driver's side are the ones to cut into for anyone who wants to know.





Print Page | Close Window