I want to install oem foglights and foglight switch in the dash not the multi function switch. Heres the deal low beam lights stay on with the high beams. Also the oem switch is set up to be grounded for the status light to work so it is a negative trigger switch. I need the foglights to only come on with the low beams and go out with the high beams. Heres my idea relay A convert switched out from negative to positive pin 85 ground from switch pin 86 fused constant 12 volt pin 30 fused constant 12 volt pin 87 12 volt out to relay B pin 87a relay B high beam trigger relay to turn off foglights with high beams pin 87a in from relay a pin 87 pin 85 chassis ground pin 86 positive high beam feed pin 30 to relay c pin 86 foglight relayrelay c foglight power relay pin 86 from relay B pin 30 pin 85 chassis ground pin 30 fused constant 12 volt pin 87 to foglights think it will work ???
- null
Why do you need three relays? I think you could omit relay "C". Run pin 30 from relay "B" to fog lights directly, its coming from relay "A" as a 12v+ fused source.
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
I was thinking this would help with the current draw but i got the foglights and they are only 10 amps so I believe you are correct.