06 Toyota Tundra, JBL Stereo Wiring

Looking for a wiring diagram for a 2006 Toyota Tundra with 6 disk indash CD changer and JBL amplifier.  Thanks!

-------------
Aaron Taulbee

12V DC Battery(Constant)	Blue / YELLOW		Rad 1	20 Amp	Junction box on left side of engine compartment
Switched Accessory	Gray		Rad 2	7.5 Amp	Junction box under left end of dash
Ground	Brown
Illumination	Green & WHITE/ green
Mute	Yellow
Steering Wheel Control Wire	BROWN / white, light GREEN/ red gray/red
Left Front +	Black	Line level output.
Left Front -	Green	Line level output.
Right Front +	Red	Line level output.
Right Front -	White	Line level output.
Left Rear +	Blue	Goes to the rear seat audio controller.
Left Rear -	Blue/red	Goes to the rear seat audio controller.
Right Rear +	Yellow	Goes to the rear seat audio controller.
Right Rear -	Yellow/red	Goes to the rear seat audio controller.

AMPLIFIER OUTPUTS

Wire Function	Color	Note	Fuse #	Size	Location
12V DC Battery	RED / black		Rad 3	30 Amp	Junction box on left side of engine compartment
Remote Turn On (input)	Gray	Accessory wire, using Rad 2 fuse as above. See vehicle notes for rear seat audio controller.
Left Front Tweeter +	Pink	To pin 2 of tweeter
Left Front Tweeter -	Violet	To pin 1 of tweeter
Right Front Tweeter +	Light green	To pin 2 of tweeter
Right Front Tweeter -	Blue	To pin 1 of tweeter
Left Rear Mid +	Black
Left Rear Mid -	Yellow
Right Rear Mid +	Red
Right Rear Mid -	White
Subwoofer 1 +	Green	To pin 4 of left front door speaker
Subwoofer 1 -	Blue/white	To pin 3 of left front door speaker
Subwoofer 2 +	BLACK / YELLOW	To pin 4 of right front door speaker
Subwoofer 2 -	WHITE/ blue	To pin 3 of right front door speaker

-------------

Dude, you rock, thanks!!!!!!!!

-------------
Aaron Taulbee