2000 Ford Escort Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Ford Escort Alarm Information )
2000 Ford Escort Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Black or Green |
Ignition Switch Harness |
Starter |
Red/White |
Ignition Switch Harness |
Ignition |
Blue |
Ignition Switch Harness |
Ignition 2 |
Black/Red |
Ignition Switch Harness |
Accessory |
Black/White |
Ignition Switch Harness |
Tach |
Yellow/Blue |
Or Red/Light Blue or Blue/Light Green (Coil 2 Cylinder) |
Neutral Safety Wire |
White/Pink |
Ignition Switch Harness |
Brake Switch |
Green |
Brake Switch |
Trunk Release |
Green/Black (-) |
Module left or right Rear Side Panel |
Trunk Pin |
Red/White (-) |
Or Red/Yellow Driver's Kick Panel |
Parking Lights |
Red/Black (+) |
Connector/Connector Driver's Kick Panel |
Head Lamp |
White/Blue (-) |
Light Switch |
Hood Pin |
Blue/White (-) |
Near Fuse Panel in White Connector |
Factory Disarm |
Black/White (-) |
Ignition Switch is EnergizeD |
Door Trigger |
Purple/White (-) |
Green Connector Driver's Kick Panel |
Door Lock |
Blue (-) |
Driver's Kick or Passenger's Kick |
Door Unlock |
Gray (-) |
|
Driver's Lock |
Green/Orange |
High Driver's Kick |
Driver's Unlock |
Red/White |
High Driver's Kick |
Passenger Unlock |
Blue |
High Driver's Kick |
Horn Wire |
Green/Orange (-) |
Steering Column |
Windows Up |
LF=Red/Black, RF=Red/White, LR=White/Red, RR=Yellow/Green |
Windows Down |
LF=Red/Green, RF=Green/Black, LR=Green/Yellow, RR=Blue/White |
|
|
Follow the12volt.com
Saturday, January 18, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.