2000 Lexus RX300 Cruise Control Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Lexus Vehicles / 2000 Lexus RX300

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Alarm Information

• Stereo Information

• View all Lexus Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Lexus RX300 Cruise Control Information )

2000 Lexus RX300 Cruise Control Wiring Information
Constant 12V+	White	White/Blue Ignition Switch Harness or Use Hot Side of Brake
Switched 12V+	Black/Yellow	Ignition Switch Harness (heater)
Ground	Use Chassis	Near Cruise Control Module
Hot Side of Brake	n/a	12 way Connector in Driver's Kick Panel Pin 9
Cold Side of Brake	Green/White (-)	12 way Connector in Driver's Kick Panel Pin 9
Tach	Orange	Right of Fuse Panel in 20 Pin Connector
VSS Wire	Purple/White	Pin 12 at CCM in Driver's Kick Panel
Notes: Vehicles with Manual Transmission require Clutch Switch. Some vehicles may require a speed signal generator and/or other parts/adapters not listed above. Rostra® Cruise Control module switch settings may differ if you use a speed signal generator or magnets and a pick up coil.

• Alarm Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.