viper remote start stopped working?

Well, I found the wire that will turn on the relay for the PINK ignition output.  It appears the relay for the ignition is bad.    I got the whole relay satellite module pulled out.   I just need to find out which ones are the relay coil terminal so I can put power to it and simulate turning the relay on or off to be sure that is the culprit.

Well I can't figured out where to tap power to simulate/operate the relay for testing so I started tapping/hitting the ignition relay thinking it could be sticking or something.  After enough hitting, I rewired everything and started it with the key incase the bypass (555L) needs to re-learn the R-code, then shut it off and tried the remote start.  To my surprised.... it started.  Tried it several times testing the shutdown inputs, valet take-over and the pre programmed run time and everything is working.

I guess the hitting did it...    what to do know...  hitting things when everything else fails actually works. 

I appreciate all your help.