omega mars 10 problem

I installed this unit in a 2007 Nissan Versa and have 2 problems. 1st problem: I can't seem to find the wire to activate for the factory remote. All I found is the wire that is operated by the switch. 2nd problem: When I try to remote start I get 3 clicks from the brain and no start.I'm using the tachless method. I even tried using the tach method and no change. Any Help Please. Thank YouSoundFX

I am not really familiar with the Omega line, but I can not find a reference to a Mars 10 on their site. If you are looking for a way to activate the remote start using a factory remote, I always use the lock leg of the driver's door lock actuator to activate the DEI systems I install. If your system does not offer a positive activation input you would need to use a relay. Does the manual make any reference to what 3 'clicks' means? Is it flashing the parking lights 3 times with these clicks?Installer, IT support, and FFL. I need less hobbies.

I finally got it to start but it won't stay running. I put the key in the ignition and no good. I found that it has something to do with the adjustments because I even went to the tach wire and the same thing. If I adjust them too much I get no activation. If I adjust them less sensitive, it starts but doesn't stay running.SoundFX