2004 chevy colorado, remote start

So that is with cutting the wire and turning key to start position and holding it there to get a reading.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

that's correct techman93,wire cut and key in crank position

I have not gotten a reading like that before. Had you kept that setting and try testing some resistors and see if you can get within 10% of that. That is what you should try.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

well,got it straightend out today.resistance reading was indeed 372 ohms,but i had cut wrong wire,cut the WHITE/ yellow instead of WHITE/ blue.so i have my dip switches set to 381 ohms and everything is fine now.got the door lock/unlock wired up so that part is operational as well.just need to double check parking light wire so i can connect that.overall very pleased with this R/S unit.forget the model # but it is made by valiant.(ordered from j.c. whitney for $56)has 1,000FT range,keyless capable,l.e.d light to show its operating.think i will order a 2nd unit to upgrade the one in my wifes van.current one is a basic R/S w/400ft range(bulldog security)a BIG thank you to techman93 and gregk for their help and insight with this project.thanks again guys