holden wiring

Home / the12volt's Install Bay / General Discussion / holden wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ice32

Copper - Posts: 116

Joined: June 12, 2007

Location: Australia

Posted: January 24, 2008 at 9:00 PM / IP Logged

Hey guys,

I'm curious if anyone has access to a wiring guide for a vs commodore

or can confirm if the door trigger is negative or positive and the easiest place to tap into the door trigger wire is?

Any info would be great,

Thanks

Back to Top

stuntinonabusa

Member - Posts: 44

Joined: November 13, 2006

Location: United States

Posted: January 24, 2008 at 9:37 PM / IP Logged

use a DMM and test the door trigger... if it is grounded with the door pin pushed in and 12v when released it is positive... vice versa for a neg trigger....

you can grab the trigger wire from an interior underdash light if it comes on when the door opens(both driver and passenger). if doing it that way, it would be a positive trigger.

if at first u dont succeed........ lower ur standards

Back to Top

Search for other posts by stuntinonabusa

ice32

Copper - Posts: 116

Joined: June 12, 2007

Location: Australia

Posted: January 25, 2008 at 12:22 AM / IP Logged

cheers

Back to Top

mad550

Copper - Posts: 201

Joined: February 23, 2006

Location: Australia

Posted: January 25, 2008 at 4:20 AM / IP Logged

Doors are ground triggered and run to bcm which has a transistorised output for fading dome light best place is under steering wheel pull down access panel and use the main loom running up the right hand side, the door wire should be white, indicators light blue and dark blue etc.

WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

holden wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.