2007 tundra pkt2 bypass

Home / the12volt's Install Bay / Car Security and Convenience / 2007 tundra pkt2 bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

throwback2332

Member - Posts: 41

Joined: May 18, 2005

Posted: February 06, 2008 at 4:01 PM / IP Logged

Hey I have a 2007 toyota tundra and im installing a remote start/alarm. I have the IM05 PKT2 module, can anybody help me with the IMI and IMO wires PLEASE. THANKS

If it's not custom, then it's not you.

Back to Top

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: February 06, 2008 at 6:01 PM / IP Logged

you should be using a keyoverride sl from fortin

all your wires are at the column

and does ford to

your making alot more work for yourself

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 06, 2008 at 7:11 PM / IP Logged

Follow the instructions and they tell you what wires need to be tapped into.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: February 06, 2008 at 7:12 PM / IP Logged

you can get the wires in the pass kick panel in a white connector imi is black imo pink

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

Back to Top

throwback2332

Member - Posts: 41

Joined: May 18, 2005

Posted: February 06, 2008 at 7:19 PM / IP Logged

Thanks Swerks, i'll check tomorrow.

Velocity Motors: The sheet says wire colors and numbers but the correct plug was the problem.

robertsc: I found all the wires from the ampfilier immobilizer unit, theres 5 i think. I tried the module on the ASSUMED RX and TX wires.

I'm hoping someone have did this kind of truck, and have a few tricks up there sleve 2007 tundra pkt2 bypass - Last Post -- posted image.

If it's not custom, then it's not you.

Back to Top

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: February 06, 2008 at 11:55 PM / IP Logged

xk 05 wont bypass with rx and tx you have to use imi imo

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

Back to Top

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: February 06, 2008 at 11:56 PM / IP Logged

ill send you a plug diagram in the morning

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

Back to Top

throwback2332

Member - Posts: 41

Joined: May 18, 2005

Posted: February 07, 2008 at 3:49 AM / IP Logged

Swerks thanks your what i was looking for. THanks that will make my headache go away. 2007 tundra pkt2 bypass - Last Post -- posted image.

If it's not custom, then it's not you.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007 tundra pkt2 bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.