where did my chirp go?

Home / the12volt's Install Bay / Car Security and Convenience / where did my chirp go? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 07, 2008 at 12:24 AM / IP Logged

When I first got the Jeep.... it chirped once when I locked the doors by remote (hitting number ONE) & it chiped twice on unlock. My little red light in the dash used to blink too but now it stays on constant unless I start the car.... I must have screwed this up when I was playing with the remote seeing what each button does.

All I know is it has an alarm & remote start installed... both works. I can hold ONE down on the remote & the alarm sounds in panic mode & if I hit ONE & TWO together... it starts the car. It is a FOUR button remote.

I just want my chirp sound back. It really isnt a big deal but Id just like to hear the chirp.

Theres a black box under the dash with wires & plugs in it... it says Viper on it so is that where the Valet switch is SUPPOSE it be? because its not there. Now there is a small square cut out in the box with a black wire running into it... but no switch.

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 07, 2008 at 12:30 AM / IP Logged

I just want my chirp sound back. It really isnt a big deal but Id just like to hear the chirp.

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 07, 2008 at 12:40 AM / IP Logged

I have a FOUR (4) button remote.

Where is the valet switch?

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 07, 2008 at 5:41 AM / IP Logged

the valet switch could be hidden anywhere or the installer didnt bother to put one in for you.

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 07, 2008 at 9:04 AM / IP Logged

Ok... thanks everyone for your help. where did my chirp go? - Page 2 - Last Post -- posted image.

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 07, 2008 at 10:17 AM / IP Logged

Ok... thanks everyone for your help. where did my chirp go? - Page 2 - Last Post -- posted image.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: February 07, 2008 at 10:31 AM / IP Logged

since you not sure were the valet button this be a good time to find it and know how it works. if your car is armed and the remote battery dies or broken or if you lose your remote your not going to be able to drive your car.

to fine it look for the alarm itself it be under the dash some were, follow a black and gray wire that be your valet.

also you may have 2 button one be for VCS ( that may not be installed) you can down load the manuals for that.

the small black wire that is not connected to any thing is your antenna leave that alone

but on viper look at all the wire plugs into u see a small blue one that shoudl have a black and a gray wire coming out that is your valet button

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 07, 2008 at 11:25 AM / IP Logged

WOOHOOOO!!! I FINALLY found the valet button.Now everything is back to working as it was when I bought the car.

THANK YOU everyone!!

Now... if you dont mind... please explain this...

I have an extra remote... the light on the remote comes on when I push a button...but nothing happends. What do I have to do to get this remote to work. I think it would be a good idea to have a working spare remote.

Thanks again for all your help!

AirWaveGT

Member - Posts: 17

Joined: November 13, 2004

Location: United States

Posted: February 08, 2008 at 7:49 PM / IP Logged

nicecaptures wrote:

WOOHOOOO!!! I FINALLY found the valet button.Now everything is back to working as it was when I bought the car.

THANK YOU everyone!!

Now... if you dont mind... please explain this...

Thanks again for all your help!

you could try to reprogram it.

have the drivers door open.

turn the ign on

press the valet button once and release it. press it again and hold it. you should hear 1 chirp

press lock on the remote and you should hear another chirp

turn off ign and make sure the remote works.

nicecaptures

Member - Posts: 12

Joined: February 06, 2008

Location: Ohio, United States

Posted: February 08, 2008 at 9:20 PM / IP Logged

Very good!! Thanks :)

Now I have to figure out how to program the remote start to that extra remote.

I cant tell you how much I appreciate all your help here in these forums! Thanks ALOT!

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

where did my chirp go?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.