the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 buick enclave, remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
mike swanson 
Copper - Posts: 290
Copper spacespace
Joined: January 28, 2003
Location: United States
Posted: March 03, 2008 at 5:39 PM / IP Logged  
i am looking for a correct wiring diagram for this car for installing a remote start keyless entry. the ones i got off of crime stopper and code alarm are wrong. none of the wires are correct at the bcm and i cant find the seccond accessory and seccond starter wires. any help will be much appreciated. thank you.
erik
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 03, 2008 at 6:26 PM / IP Logged  
12 VOLTS RED / white (2A) ignition harness   + 
 IGNITION pink ignition harness or BCM(left of steering column), pin 2 on light green plug   + 
 ACCESSORY brown ignition harness or BCM, pin 21 on light green plug   + 
 ACCESSORY 2 white ignition harness or BCM, pin 14 on light green plug   + 
 STARTER yellow ECM (mounted to radiator support) pin 26 on blue plug   + 
 STARTER 2 white ignition harness or BCM, pin 14 on light green plug   + 
 KEY SENSE white ignition harness or BCM, pin 14 on light green plug   + 
 TACH SIGNAL  any fuel injector   AC 
 LOCK pink/black BCM, pin 12 on gray plug   - 
 For vehicles without the express up and down windows feature. On vehicles with this feature, 5 wire the door lock motor wires in each front door at the Door Module (Driver + Passenger, modules are located in the window switch)lock motor wires are gray, pin 7 in the brown plugs. The rear doors power lock is light green (+) at the BCM, pin 7 on the gray plug.
 UNLOCK ORANGE / black BCM, pin 11 on gray plug   - 
 For vehicles without the express up and down windows feature. On vehicles with this feature, 5 wire the door lock motor wires in each front door at the Door Module (Driver + Passenger, modules are located in the window switch) The unlock motor wires are tan, pin 8 in the brown plugs. The rear doors power unlock is light blue (-) at the BCM, pin 9 on the gray plug.
 DRIVER LOCK MOTOR grey pin 7 in the brown plug in door module   5wi 
 DRIVER UNLOCK MOTOR tan pin 8 in the brown plug in door module   5wi 
 DOORPIN  see notes    
 express down only power windows, the front door trigger wires are at the BCM, pink plug. The Left Front door is gray/black pin 10. The Right Front door is tan/white pin 8. express up and down power windows, the front door trigger wires are at the door module(in window switch) in each door. The Left Front door is gray/black pin 13 on the brown plug. driver side module The Right Front door is tan/white pin 13 on the brown plug. passenger side module The rear door trigger wires are at the BCM, pink plug. The LR door is light blue/black pin 15. The RR door is light GREEN/ black pin 14. Use all four wires with diode to isolate
 HOODPIN pink/black pin 17 in black plug @ BCM, or switch   - 
 TRUNK PIN pink/black pin 12 in pink plug @ BCM   - 
 On vehicles with the power liftgate, this wire is at the Lift gate module in the driver side rear quarter panel. It's pin 5 in the black 16 pin plug
 TRUNK RELEASE grey pin 23 in pink plug @ BCM   - 
 On vehicles with the power liftgate, the open/close wire is dark GREEN / WHITE at the switch in the dash The hatch release motor wire is light. blue (+) in the passenger kick panel, the harness to the rear.
 FACTORY DISARM light green pin 20 in pink plug @ BCM   - 
 On vehicles with express up and down power windows this will be pin 4 in the brown plug at the driver door module (in the window switch)
 BRAKESWITCH light blue pin 5 in brown plug @ BCM   + 
 HAND BRAKE ORANGE / black pin 16 in brown plug @ BCM   - 
 HORN tan pin 18 in brown plug @ BCM   - 
mike swanson 
Copper - Posts: 290
Copper spacespace
Joined: January 28, 2003
Location: United States
Posted: March 04, 2008 at 9:43 AM / IP Logged  
have you installed this car yet?
we have this same sheet and it is wrong for this car
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: March 06, 2008 at 12:57 AM / IP Logged  

Which wires are you having trouble with Mike?

FYI I've got Scytek's info and they're basically the same except:

They have brake as white, pin 6, brown BCM conn.

First starter isn't mentioned (it doesn't appear to be required for remote start)
2nd starter(which is also your keysense) is (+) through a resistor.
They don't mention the alternate wire locations for the cars with auto-up windows.

C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
hydroz_23 
Copper - Posts: 97
Copper spacespace
Joined: November 20, 2006
Location: United States
Posted: March 06, 2008 at 5:25 PM / IP Logged  
12 Volts          RED / white (2A)     +     ignition harness
               
Starter               yellow (not for remote start)     +     ECM, blue plug, pin 26
Second Starter          white     +9.6K ohm     ignition harness or BCM, lt. green plug, pin 2
Starter is positive trigger thru a 9600 ohm resistor. Must open this wire when triggering. The BCM (Body Control Module) is to the left of the steering column.
Ignition          pink     +     ignition harness or BCM, lt. green plug, pin 14
                    
Accessory          brown     +     ignition harness or BCM, lt. green plug, pin 21
Second Accessory     same as second starter wire     +6.3K ohm     
Accessory is positive trigger thru a 6300 ohm resistor. Must open this wire when triggering.
Keysense          same as second starter wire          
                              
Power Lock          pink/black     -     BCM, gray plug, pin 12
On vehicles with express up and down power windows these wires are not present. To do door locks on these vehicles you have to 5 wire the door lock motor wires in each front door at the DDM and PDM. The lock motor wires are gray in the brown plugs, pin 7. The unlock motor wires are tan in the brown plugs, pin 8. The rear doors power lock is lt. green (+) at the BCM, gray plug, pin 7. The rear doors power unlock is lt. blue (-) at the BCM, gray plug, pin 9. The DDM (Driver Door Module) is part of the window switch assembly in the driver door. The PDM (Passenger Door Module) is part of the window switch assembly in the passenger door.
Power Unlock          ORANGE / black     -     BCM, gray plug, pin 11
     
Lock Motor     gray     5 wire     driver kick, door harness
On vehicles with express up and down power windows, use gray in the driver side rear door harness.
Driver Unlock Motor     tan     5 wire     driver kick, door harness
On vehicles with express up and down power windows, you have to go into the driver door to find this wire at the DDM, brown plug, pin 8. The DDM (Driver Door Module) is part of the window switch assembly in the driver door.
Passenger Unlock Motor     tan     5 wire     driver side rear door harness
Parking Lights (-)     BROWN / white     -     switch or BCM, white plug, pin 8
     
Parking Lights (+)     purple (L), BROWN / white (R)     +     each kick, harness to rear
Hazards     tan     -     switch or BCM, lt. green plug, pin 19
Turn Signal (Left)     lt. blue/white (F), yellow (R)     +     BCM, brown plug, pins 4 (F) and 1 (R)
Turn Signal (Right)     dk. blue/white (F), dk. green (R)     +     BCM, black plug, pin 5 (F) and brown plug, pin 2 (R)
     
Headlight          white     -     switch or BCM, white plug, pin 12
                    
Reverse Light          lt. green     +     BCM, pink plug, pin 2
     
Left Front Door Trigger     gray/black     -     BCM, pink plug, pin 10
On vehicles with express up and down power windows, the front door trigger wires are at the door module in each door. The LF door is gray/black at the DDM, brown plug, pin 13. The BCM (Body Control Module) is to the left of the steering column. The DDM (Driver Door Module) is part of the window switch assembly in the driver door.
Right Front Door Trigger     tan/white     -     BCM, pink plug, pin 8
On vehicles with express up and down power windows, the front door trigger wires are at the door module in each door. The RF door is tan/white at the PDM, brown plug, pin 13. The BCM (Body Control Module) is to the left of the steering column. The PDM (Passenger Door Module) is part of the window switch assembly in the passenger door.
Left Rear Door Trigger     lt. blue/black     -     BCM, pink plug, pin 15
Right Rear Door Trigger     lt. GREEN/ black     -     BCM, pink plug, pin 14
Dome Supervision     gray/black     +     BCM, pink plug, pin 1
     
Trunk/Hatch Pin          pink/black     -     BCM, pink plug, pin 1
On vehicles with the power liftgate, this wire is at the LGM, black 16 pin plug, pin 5. The LGM (Liftgate Module) is in the driver side rear quarter panel.
          
Hood Pin          pink/black     -     pin switch or BCM, black plug, pin 17
     
Trunk/Hatch Release     gray     -     BCM, pink plug, pin 23
Meter this wire while opening the rear hatch from the handle on the hatch. The BCM (Body Control Module) is to the left of the steering column. On vehicles with the power liftgate, the open/close wire is dk. GREEN / WHITE at the switch in the dash or at the LGM, black 16 pin plug, pin 12. The LGM (Liftgate Module) is in the driver side rear quarter panel.
Trunk Release Motor     lt. blue     +     passenger kick, harness to rear
Factory Alarm Arm     arms on lock with door open          
Factory Alarm Disarm     lt. green     -     BCM, pink plug, pin 20
Meter this wire while turning the key in the driver door key cylinder. On vehicles with express up and down power windows, you have to go into the driver door and find this wire at the DDM, brown plug, pin 4. The DDM (Driver Door Module) is part of the window switch assembly in the driver door.
Disarm No Unlock     with ignition and Passkey          
               
Tachometer          NOT pink/black     ac     any fuel injector
               
Speed Sense          dk. GREEN / WHITE     ac     EBCM, pin 11 or radio (some models)
Brake Wire          lt. blue     +     BCM, brown plug, pin 5
     
Parking Brake          ORANGE / black     -     switch or BCM, brown plug, pin 16
     
Horn Trigger          tan     -     switch or BCM, brown plug, pin 18
Memory Seat 1          gray/black and orange          switch or DDM, gray plug, pins 14 and 5
Short these two wires with a 2260 ohm resistor to trigger memory seat 1, and a 4260 ohm resistor for memory seat 2. The DDM (Driver Door Module) is part of the window switch assembly in the driver door.
Memory Seat 2     same as memory seat 1 wire          
hydroz_23 
Copper - Posts: 97
Copper spacespace
Joined: November 20, 2006
Location: United States
Posted: March 06, 2008 at 5:28 PM / IP Logged  
easiest way to do this car is with a xk01-gmdl6x and a xk06-pkg9. very easy car to do with the modules. get 12v at fuse box. there is 3 thick RED / black wires.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer