the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

service theft system light


Post ReplyPost New Topic
< Prev Topic Next Topic >
theastac 
Member - Posts: 3
Member spacespace
Joined: December 29, 2007
Location: Illinois, United States
Posted: March 20, 2008 at 1:51 PM / IP Logged  
2001 cadallic deville installed code alarm ca-680 and xko1 bypass everything works but having two issues the service theft system lights keeps coming on during remote start and the radio will not operate if remote started but operates fine under key start. any ideas?
audioman2007 
Copper - Posts: 580
Copper spacespace
Joined: February 20, 2007
Location: United States
Posted: March 20, 2008 at 3:03 PM / IP Logged  

If the vehicle starts without a problem, its not a bypass problem. Check the wires for the remote start (not bypass module) to see if they are all connected and connected to the right wires on the vehicle. I know on my car (cavalier) there is a wire that needs to be connected to the wire for the heater. If that wire is not connected, then my check engine light will come on during remote start but will go out after I disengage it.

audioman2007 
Copper - Posts: 580
Copper spacespace
Joined: February 20, 2007
Location: United States
Posted: March 20, 2008 at 3:08 PM / IP Logged  
Another thing..... with your radio not working, there is some wire that is not connected. I think it might be your ignition wire, not the vehicle one, but the RS one. Just simply check all your connections. If you want me to, I can check on a website I have and see what color wires you need to connect to.
audioman2007 
Copper - Posts: 580
Copper spacespace
Joined: February 20, 2007
Location: United States
Posted: March 20, 2008 at 3:25 PM / IP Logged  
I just looked on that website and saw that you have 2 actuall ignition wires. My vehicle only has 1, but yours has 2. Your main igniton wire is pink. Your 2nd ignition wire is white and is located at the ignition harness as well. This wire is probably for your radio, but it could also be the pink wire. Both wires must be connected to the remote start. Read your manual. In it will have 2 ignition wires. One is your main ignition wire. The 2nd is your 2nd ignition wire. You must wire those accordinly.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer