07 Nissan Murano Alarm/Remote Start Wiring

there are many options. you can get the KEYOVERIDE-ALL by fortin.

here is the right wiring info for 2007 nissan murano *12 Volts     green (40A)     +     ignition harness *Starter             BLACK/ red     +     ignition harness *Second Starter     BLACK / YELLOW     +     ignition harness *Ignition     BLACK/ red     +     ignition harness *Accessory     red             +     ignition harness *Second Acc.     WHITE/ blue     +     ignition harness *Keysense     BLACK/ red      +     ignition harness or BCM above accel pedal, pin 37 *Power Lock     blue             -     driver door module in door, pin 4 (or add pins at bcm) *Power Unlock     red (dbl pulse)     -     driver door module in door, pin 6 (or add pins at bcm) *Parking Lights (+)RED / blue     +     driver kick, harness to rear *LF Door Trigger     lt. blue     -     BCM above accelerator pedal, pin 62 *RF Door Trigger     RED / green or red-     BCM above accelerator pedal, pin 12 *LR Door Trigger     RED / white      -     BCM above accelerator pedal, pin 63 *RR Door Trigger     RED / white or RED / yellow-     BCM above accelerator pedal, pin 13 *Dome Supervision     red     -     BCM above accelerator pedal, pin 48 *Trunk/Hatch Pin     PURPLE / white     -     BCM above accelerator pedal, pin 58 *Factory Alarm Arm     arms with lock           *Factory Alarm Disarm     disarms with unlock           *Disarm No Unlock     single pulse on power unlock wire *Tachometer     NOT red or black     ac     any ignition coil or fuel injector *Brake Wire     RED / green     +     brake pedal switch *Horn Trigger     GREEN/ orange     -     horn switch