the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

combining 2 rca cables on 1 source?


Post ReplyPost New Topic
< Prev Topic Next Topic >
crvz 
Member - Posts: 48
Member spacespace
Joined: February 18, 2003
Posted: April 30, 2008 at 11:19 AM / IP Logged  
So I've got a bluetooth handsfree device that has an internal speaker as well as audio out jack for interconnects. I'm afraid the internal speaker will not be adequate, and what I'd like to do is hook up my front speakers to the audio out feature, but I'm unsure which is the best method to do so without introducing unwanted noise to the system. I've thought of a few solutions, but which is the best?
1) Use a "y" connector and plug both the bluetooth output and radio preout into the "front" input of the 4 channel amplifier without otherwise isolated the cables (radio preouts will be cutoff during calls with the audio interrupt wire from the bluetooth device).
2) Try to find an interconnect relay that triggers with the audio interrupt output from the bluetooth unit to actively switch the interconnects when a call is made or received.
3) Use two amps, the 4 channel for the radio and a 2 channel with the bluetooth output, and use 4 relays to switch the 4 front speaker wires when a call is made or received.
4) Leave the front speakers out of the system, and find a place for a dedicated bluetooth speaker and amp (I have a 2 channel amp sitting around that I could use for this, but I'd have to find a small speaker and place to mount it).
5) other ideas???
I'm putting a good amount of time and using decent amps and speakers for the radio (alpine dva-7996 radio, alpine mrv-f450 amp, alpine type R speakers), and I'd hate to corrupt all the effort and quality put into the system by rigging up some crummy setup just to get bluetooth on the front speakers, but if this can be done with ease I'd prefer it.
haemphyst 
Platinum - Posts: 5,053
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: April 30, 2008 at 11:26 AM / IP Logged  
I can answer the #2 scenario. I have an older Nakamichi dual RCA level automatic source switch... Lemme know if you wanna make a deal.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 17, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer