the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

01 caravan w/ infinity


Post ReplyPost New Topic
< Prev Topic Next Topic >
sstrawsb 
Member - Posts: 34
Member spacespace
Joined: September 15, 2006
Location: United States
Posted: May 24, 2008 at 1:31 PM / IP Logged  

ugh. This is the first radio in a while thats put up a fight. Well after a little while of searching I stumbled across this thread: https://www.the12volt.com/installbay/forum_posts.asp?tid=27049&KW=chrysler+

Woohoo I hooked a wire up and got the amp to turn on but the speakers will flick in and out depending on the volume level. Can anyone help me out?

mobile1 
Silver - Posts: 479
Silver spacespace
Joined: February 23, 2004
Location: United States
Posted: May 25, 2008 at 11:52 PM / IP Logged  
what are you using for a ground? I know some of those have the spade connector AND the ring terminal with the braided wire on the factory radio. You might want to try grounding the radio to the chassis.
boogeyman 
Silver - Posts: 359
Silver spacespace
Joined: October 18, 2007
Location: Tennessee, United States
Posted: May 26, 2008 at 8:50 AM / IP Logged  
yeah , I would do what Mobile 1 suggested,sounds to me like a ground issue, ground to chasis..............I've got in the habit of not using the ground on the harness, just grounding to the Chassis everytime to avoid this.    good luck
sstrawsb 
Member - Posts: 34
Member spacespace
Joined: September 15, 2006
Location: United States
Posted: May 26, 2008 at 9:44 AM / IP Logged  
Thanks guys. Ill post what worked for me so others can use it as a resource. I did ground the radio to the chassis and that didnt seem to fix the problem. I then wired a relay to turn on the remote wire and it worked fine. Weird, it was the first time I had to do that but it worked.
Thanks guyd
kassdog 
Copper - Posts: 257
Copper spacespace
Joined: March 09, 2007
Location: United States
Posted: May 26, 2008 at 11:57 AM / IP Logged  

Its not a ground issue. I had the same issue when I did my first one. I hooked up another relay to boost the amps and it worked fine. Try that.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer