08 silverado, alarm/remote start?

Home / the12volt's Install Bay / Car Security and Convenience / 08 silverado, alarm/remote start? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

triplej

Member - Posts: 3

Joined: July 01, 2008

Location: Arizona, United States

Posted: July 02, 2008 at 12:46 PM / IP Logged

I have a 2008 chevrolet silverado 1500ls I am Installing a hornet 563t alarm/remote start with a DE 1701g bypass module. My question is do i still have to wire in relays with this remote start?? or should i stick with the xk01/xk06 configuration??

Back to Top

dtk1

Copper - Posts: 179

Joined: June 21, 2007

Location: United States

Posted: July 02, 2008 at 9:57 PM / IP Logged

1701G wire up the realy with resistors and your done

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 03, 2008 at 9:20 AM / IP Logged

Use the XK modules or the iDatalink modules and no need for resistors or relays.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

smcshark

Member - Posts: 34

Joined: June 22, 2008

Location: Ontario, Canada

Posted: July 03, 2008 at 12:29 PM / IP Logged

use I data link module for that truck, ADS-DLSL-GM, XK01-xk06 has had issues with lock up on theft system, forget relays and resitors.

Automotive Electronic Specialist

Back to Top

triplej

Member - Posts: 3

Joined: July 01, 2008

Location: Arizona, United States

Posted: July 10, 2008 at 12:17 AM / IP Logged

It appears that all wires are terminated correctly, and the remote start goes through all the steps except cranking over, green flashing light on the ads-dl when remote start is initiated, receiving signal from the RS starter line, and now im just going in circles!! Have you seen this in the past???

Back to Top

smcshark

Member - Posts: 34

Joined: June 22, 2008

Location: Ontario, Canada

Posted: July 10, 2008 at 8:11 AM / IP Logged

I have seen this B4, it is a problem with the ADS-DLSL-GM, double check all your wire connections, then follow the rest procedure and try to program again. Follow the instructions very closly, from there you should be fine.

Automotive Electronic Specialist

Back to Top

smcshark

Member - Posts: 34

Joined: June 22, 2008

Location: Ontario, Canada

Posted: July 10, 2008 at 8:12 AM / IP Logged

I meant follow the reset proceedure

Automotive Electronic Specialist

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

08 silverado, alarm/remote start?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.