the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pioneer deh 1100


Post ReplyPost New Topic
< Prev Topic Next Topic >
spaids 
Member - Posts: 2
Member spacespace
Joined: September 03, 2008
Posted: September 03, 2008 at 8:23 PM / IP Logged  

Hi,

I need the definitions of the wires to install a Pioneer DEH-1100.  I found this quesiton asked once before with a search but there was never an answer. 

Thanks

Spaids

the fat kid 
Member - Posts: 35
Member spacespace
Joined: February 05, 2008
Posted: September 03, 2008 at 9:58 PM / IP Logged  

really, umm

purple and green are rear speakers

white adn grey are fronts

blue is power antenna

blue with white stripe is remote

orange is maybe illumination

and red is the acc

yellow is constant *could have those last two backwards, usually the one with the fuse on it is the constant*

that should be enough to get you started.

spookiestylez 
Silver - Posts: 531
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2005
Location: Virginia, United States
Posted: September 03, 2008 at 10:13 PM / IP Logged  
to be more specific
yellow-constant 12v (mem)
red- switched power (12v)
black-ground
blue-power antenna
blue/white-amp turn on
orange-dimmer
ORANGE / white-illumination
white-front left +
WHITE/ black-front left -
grey-front right +
grey/black- front right -
green- rear left +
GREEN/ black- rear left -
violet- rear right +
violet/black- rear right -
those are the basics for most audio connections, but some radios come with more such as mute wires (brown) etc.
rtfm
spaids 
Member - Posts: 2
Member spacespace
Joined: September 03, 2008
Posted: September 04, 2008 at 12:40 PM / IP Logged  
Thanks.
I'll get back to work on this tonight. My unit maybe dead and I need to verify my wires.
Thanks again
spaids
the fat kid 
Member - Posts: 35
Member spacespace
Joined: February 05, 2008
Posted: September 04, 2008 at 7:40 PM / IP Logged  
just hook up red yellow and black and youll find out, if you hook the acc wire in with the constant, it will come on immedatley, that would help oyu trouble shoot, and also remember alot of times they dont just spark to life you have to hold down the power or source button for a couple seconds...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, February 4, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer