2008 tacoma tx rx data wires?

I have a Key-Override-All from Fortin, and i want to install it in a 2008 Tacoma.I could not find anywhere informations about Rx(data in), Tx(data out). Where can i find these wires in the truck, and what colors are they? And one more thing, the blue wire, (-) while running, that has to be connected to a (-) output from alarm? Thank you Calin.

http://www.idatalink.com/installguide.php Last one on the list Go to the link and youll see the wires you are looking for. I know its not the Fortin directions but itll show you what you need.Cris

if you go to BypassKits website and look up the vehicle in question.. it will give you a list of modules that will work... then open the install guide for those modules and they usually give you all the wiring info you need... wire colors, etc...  as if you were using their module.... thats often what i do....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Its easy.....on the manual it tells you that its pin 4 and 5....PIN #3 is EMPTY.  Therefore the next pin is 4 and then 5.  Count from where pin 3 is empty for you.  Its as simple as that.

Thank you for your answers, Calin.