2008 jeep liberty alarm wiring

Home / the12volt's Install Bay / Car Security and Convenience / 2008 jeep liberty alarm wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jsanchez71

Member - Posts: 28

Joined: April 03, 2008

Location: Mexico

Posted: September 20, 2008 at 6:02 PM / IP Logged

HAS ANYONE INSTALLED A ALARM TO THIS TRUCK, I USED THE AUDIOVOX PAGE, AND I COULDN´T FIND THE DOOR LOCKS WIRE, ACCORDING TO THIS PAGE THE DOOR LOCK WIRE IS VIOLET/DK GREEN WITH 100 OHM & 330 OHM RESISTORS, BUT DIDN´T FIND THIS WIRE. ANY HELP WILL BE APPRECIATED.

TKS

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 20, 2008 at 8:12 PM / IP Logged

It's coming thru the door harness.

Back to Top

jsanchez71

Member - Posts: 28

Joined: April 03, 2008

Location: Mexico

Posted: September 22, 2008 at 10:26 AM / IP Logged

I did find that harness, but there is no PURPLE / dk green wire on it., everuthing else worked perfect, but this wire it's different, any sugestions?

Do you know if it's the same color specification on the directech's doc's?

Any help will be appreciated.

Back to Top

StealthEs

Copper - Posts: 326

Joined: September 04, 2003

Location: New Jersey, United States

Posted: September 22, 2008 at 1:06 PM / IP Logged

Power Lock

PURPLE / dk. green

- 330 ohms

driver kick or TIPM, C7, black plug, pin 2

The TIPM (Totally Integrated Power Module) is under the hood, on the driver side fender. On vehicles with express windows, have to go into the passenger door and use PURPLE / lt. green at the PDM (Passenger Door Module), blue plug, pin 4.

Power Unlock

same as power lock

- 100 ohms

Cris

Back to Top

jsanchez71

Member - Posts: 28

Joined: April 03, 2008

Location: Mexico

Posted: September 22, 2008 at 1:18 PM / IP Logged

This truck comes with express windows, so I should go to the passenger door correct?

Back to Top

StealthEs

Copper - Posts: 326

Joined: September 04, 2003

Location: New Jersey, United States

Posted: September 22, 2008 at 1:25 PM / IP Logged

yes , you have to go into the door and hook up the wire at the module

Cris

Back to Top

jsanchez71

Member - Posts: 28

Joined: April 03, 2008

Location: Mexico

Posted: September 22, 2008 at 2:45 PM / IP Logged

OK, I will go for that using the 100/330ohm resistors and let you know the results, thanks a lot for the Help, By the way, where did you get this info?

Jorge

Back to Top

StealthEs

Copper - Posts: 326

Joined: September 04, 2003

Location: New Jersey, United States

Posted: September 22, 2008 at 9:16 PM / IP Logged

jsanchez71 wrote:

OK, I will go for that using the 100/330ohm resistors and let you know the results, thanks a lot for the Help, By the way, where did you get this info?

Jorge

Directechs

Cris

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 jeep liberty alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.