xk01 with 2004 yukon

Home / the12volt's Install Bay / Car Security and Convenience / xk01 with 2004 yukon (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bounty21

Member - Posts: 3

Joined: December 01, 2008

Location: Maryland, United States

Posted: December 01, 2008 at 9:05 PM / IP Logged

i'm trying to get this thing 2 work i can get it to start for 3 sec then shuts off i have a 1400 xp python and the xk01 mod i cann't get the light to blink at all when pressing the button on the mod like it says can some one tell me and info on this

Back to Top

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: December 02, 2008 at 6:34 AM / IP Logged

It is acting like it is not bypassing the security key.

Do the door locks work?

If so, make sure you have attached the ground while running from the RS.

If you are not getting door locks, make sure you have attached to the correct databus wire.

Reset the unit and reprogram it.

If you still get nothing, re-flash the unit with the latest firmware for your vehicle.

If still noting, the unit must be bad.(happens on occasion)

Brent Haugen

Fargo, ND

Back to Top

bounty21

Member - Posts: 3

Joined: December 01, 2008

Location: Maryland, United States

Posted: December 02, 2008 at 10:17 AM / IP Logged

door locks don't work but the horn does i cann reprogram the mod they didn't give me the hub with the mod

Back to Top

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: December 02, 2008 at 11:33 AM / IP Logged

Does it have the correct firmware for your vehicle?

It should be the AMDL 6 for your truck.

It should be printed on the label.

Brent Haugen

Fargo, ND

Back to Top

32valvefox

Member - Posts: 4

Joined: February 11, 2008

Location: Ohio, United States

Posted: December 02, 2008 at 8:51 PM / IP Logged

ive had a similar issue before. is your data wire soldered?

Back to Top

bounty21

Member - Posts: 3

Joined: December 01, 2008

Location: Maryland, United States

Posted: December 06, 2008 at 8:43 AM / IP Logged

thanks got it working got a replacement mod the other was bad

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

xk01 with 2004 yukon

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.