the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

tach programming, no start


Post ReplyPost New Topic
< Prev Topic Next Topic >
rfwave 
Copper - Posts: 120
Copper spacespace
Joined: November 06, 2006
Location: Alberta, Canada
Posted: December 06, 2008 at 12:28 AM / IP Logged  

autostart AS-2461-TW-FM into 92 eagle vista .

i've never experienced something happened like this one ;

when i was programmed tach and realized there was an error ,but i kept go on (followed procedure ) , i  started the car with key . the car wont crank , i only heard some ZZZZ...noises .( car starter in good condition ) .

is it possible that the RS can prevent the current flow to starter of the car ??? . ( no starter kill ) .

thank you .

rfwave 
Copper - Posts: 120
Copper spacespace
Joined: November 06, 2006
Location: Alberta, Canada
Posted: December 06, 2008 at 10:11 PM / IP Logged  

why ? this is a tough ? for me .

i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: December 06, 2008 at 11:01 PM / IP Logged  
Does the starter turn the engine over at all? When you connected the starter wire from the remote start unit, did you cut the car's starter wire, and it possibly came apart when you spliced it back together?
rfwave 
Copper - Posts: 120
Copper spacespace
Joined: November 06, 2006
Location: Alberta, Canada
Posted: December 08, 2008 at 1:17 PM / IP Logged  

no , engine didnt turn over at all , it sounds like a very weak battery , ( but it is a new batt ) .  at first i wanted to install starer kill , i did cut the stater wire , then i changed my mind and reconnected .

as you said it possibly came apart . i will double check it in a warmer days ,right now  its  too cold outside .

thanks " idiot " .

i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: December 08, 2008 at 6:26 PM / IP Logged  
Did you check the battery voltage while attempting to start?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer