2005 chrslyer 300 lock/unlock motor

Home / the12volt's Install Bay / Car Security and Convenience / 2005 chrslyer 300 lock/unlock motor (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bgraper

Member - Posts: 27

Joined: November 16, 2008

Location: Ontario, Canada

Posted: December 17, 2008 at 10:41 PM / IP Logged

When installing the remote start, do I need to use the lock/unlock MOTOR wires?

I have installed a 2002 Chrysler Sebring remote start with absolutely no issue. I am fine with resistors and relays.

I am not sure what to do with the lock/unlock motor.

ALSO --> The headlight wires. There is a positive AND a negative. DO i need to use relays to trigger both of these when the remote start sends the headlight signal?

Back to Top

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: December 17, 2008 at 11:16 PM / IP Logged

use only one parklight wire, either negative or positive will work.

the lock/unlock motor wires wont be used at all. unless your going to do driver door priority. those are for the actuator in the door.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 chrslyer 300 lock/unlock motor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.