02 lincoln ls, viper 5900

and the wires u mentioned are inputs.commit your way to jehovah and he will act in your behalf. psalms 37:5

Yes they r the 3 heavy gauge wires(2 red 1 red w white stripe)on the satellite relay for the remote start. manual says they r 12V input for high current outputs n they have a 30a fuse on each wire

Maybe I should have stated "what those wires are used to supply". I'm sorry for your mis-understanding. The wires you speak of are the inputs for the on-board relay #87 terminals, of the satellite. They power the same wires that the factory RED or RED / WHITE wires power, at the cylinder.Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

02 lincoln ls and Viper 5900 r/s The prob I am having is the door unlock wire at the door module requires 1 pulse to unlock driver door and a sec pulse to unlock all the doors on the same wire. I would like to keep it that way. The alarm has a main unlock wire then a second unlock wire for progressive locks. Can I attach both the main and secondary wire from the alarm to the same wire on the door control module, If so do i need to diode isolate them or use a relay?

You need to 5 wire the driver's door unlock wire and use the 1st unlock wire on this relay. Then use the other unlock wire for the other doors.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Its a single pulse 2 unlock the drivers door then a second pulse on the same wire to unlock the rest of the doors

Sounds good to me can you tell me which way the stripe should go towards the door lock module or the alarm module

the striped side should face the alarm.commit your way to jehovah and he will act in your behalf. psalms 37:5