the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 s-10 power window conversion


Post ReplyPost New Topic
< Prev Topic Next Topic >
pincky 
Member - Posts: 25
Member spacespace
Joined: November 11, 2002
Location: United States
Posted: March 21, 2003 at 6:47 PM / IP Logged  
Hi there i have an 2000 s-10 with manual windows that i am converting to power...
and my Question is
i would like to use the factory switches if possable but to do it do need a new door panel that from an s-10 with factory switches? or is there a plate like the sliverado's that just unscrew?
your help would be great thanks!!
Vince
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 21, 2003 at 8:09 PM / IP Logged  
i just did a 2000 about a month ago and no there is no plate. you have to use adtermarket switches or replace the door panels. what brand of windows are you using??
drop a line if you need help picking out some switches.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
pincky 
Member - Posts: 25
Member spacespace
Joined: November 11, 2002
Location: United States
Posted: March 23, 2003 at 4:14 PM / IP Logged  
i am using spal universal powered window switches
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 23, 2003 at 6:55 PM / IP Logged  
i used switch lit #33040147 and it worked great.
go to spal-usa.com and click on power windows. then click on switch kits. it will under the flush mount kits.
that will show you what they look like.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
AlarmTech 
Copper - Posts: 101
Copper spacespace
Joined: December 08, 2002
Location: United States
Posted: March 25, 2003 at 12:23 AM / IP Logged  
don't know if the kit # above refers to this kit or not, but the Spal Joker kit has "pods" for the switches, kinda goofy, but still OK. Painted to match they look much better. They can also potentially cover up the hand crank hole. I have done a few S-10's with the Euro trim rings and near flush switches, looks nice and clean. But i used Electric-Life OEM conversion kits.
But for top points, i would go for the clean factory look and get a powered S-10 door panels. or
cap the hand crank holes and go for a center console switch panel.
Viper Equipped

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 27, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer