the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 honda civic wiring door locks for alar


Post ReplyPost New Topic
< Prev Topic Next Topic >
raulromo34 
Member - Posts: 28
Member spacespace
Joined: January 11, 2006
Location: United States
Posted: March 23, 2009 at 10:51 AM / IP Logged  
i have an 2006 honda civic and am trying to wire the power locks to work with my alarm.  what type of door locking system do these have??  neg.?  3 wire?  5 wire??  is there anything special about this cars door locking system?  i put an alarm with out door locks on an 2008 and the alarm was going off for no reason.  i ended up taking the alarm out.
football fanatic
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 23, 2009 at 1:07 PM / IP Logged  
All the info you need is on this site at vehicle wiring. Why would an alarm trigger when you hadn't connected the door locks?  Has to be another reason like interior lights not shutting down because the doors haven't been locked by the alarm.
raulromo34 
Member - Posts: 28
Member spacespace
Joined: January 11, 2006
Location: United States
Posted: March 23, 2009 at 1:22 PM / IP Logged  
actually the customer complained that the alarm was triggering with no one around, after the alarm was set  for a few hours. i turned the impact sensor down all the way to make sure sensor wasnt the problem.  i didnt know if there was some type of drop in current, wire alarm to battery.  the alarm never went off at my shop.  but customer complained, so we pulled it.  do you know if the 06 honda civic is a 5 wire neg???  or can i just tap into the wires right from alarm?  thanks  Raul
football fanatic
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 23, 2009 at 2:46 PM / IP Logged  
What's a 5 wire neg? There's no such creature. Green or Blue and Grey on a white plug at rear of fuebox, or a plug in the driver's kickwell, low current  2 wire neg locking if your alarm only has 2 lock output wires diode them.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer