2003 jeep grand cherokee

Can anyone tell me what devices i need for a clifford/viper alarm for remote start bypass (has the grey chip key) and something about the door locks needs another device? thanks in advance....

You can use several bypasses in that car. I usually use a PKU-CH. For locks you will need a XK01 with the AMDL platform flashed on it, i believe they come flashed for that.

Hey Thanks for the info...

from Trilogix (bypasskit.com) XK01: does locks only PKUCH: does transponder only JDL-PK: does both with one product Other options: If you can find an old-stock DEI 455J, works great for locks. DEI 555C is unpleasant to install, but works for transponder. www.ifar.ca and www.idatalink.com probably have other solutions. TIP 1: You do have two good keys for this car, right? Whatever you're using, need two keys to get started. TIP 2: You actually could do the locks without a module, but it's not worth the effort. Need to run wires into BOTH front doors, and configure two relays inside each door. Again, not worth it, but at least so you know.

Hey Thank you for going over all that... Glad you posted i went with the jdl-ok thanks again....

JDL-PK i ment Thanks

Don't worry you aren't the only one not looking at the keyboard and hitting O for P!