viper 5901 no unlock r/s re lock?

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 no unlock r/s re lock? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

peterubers

Silver - Posts: 706

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 29, 2006

Location: United States

Posted: April 06, 2009 at 4:28 PM / IP Logged

So .. this unit won't let you UNLOCK... REMOTE START .. THEN RELOCK AFTER SUCCESSFUL START?

What's the setting for that -- not clear in the menu 1, 2, or 3, and i'd be pretty surprised if this wasn't a feature of this r/s brain.

thx

The search function is your friend.

Back to Top

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: April 06, 2009 at 4:33 PM / IP Logged

I believe it will, if you have "ignition-controlled locks"(menu 1, sub-menu 5, option 2 or 3) enabled.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Back to Top

peterubers

Silver - Posts: 706

Joined: December 29, 2006

Location: United States

Posted: April 07, 2009 at 6:55 AM / IP Logged

didn't work... any other possibilities? thnx

The search function is your friend.

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: April 07, 2009 at 8:50 AM / IP Logged

connect the "factory alarm disarm" to your unlock wire in the vehicle (use a relay if it's anything but a low current neg. trigger needed for unlock) then take the small gauge purple wire in the small green harness (200mA 2nd Starter Output) and connect it (again with a relay if needed)to your lock wire in the vehicle.

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: April 08, 2009 at 10:13 PM / IP Logged

you can just use factory disarm and factory rearm wires just make sure the polarity is correct

Back to Top

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: April 10, 2009 at 5:04 PM / IP Logged

another kelly is right but you need to put a diode in between the purple wire because it back feeds if you dont.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 no unlock r/s re lock?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.