spacer spacer spacer spacer

pac tr7 programming problem?

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 34
Member spacespace
Joined: April 26, 2009
Location: Arkansas, United States
Posted: May 26, 2009 at 9:57 AM / IP Logged  

Hello everyone,

I did a search for pac tr7 and didn't see this specific problem so please forgive me if this is a repost.  I have an IVA w205 and want to install the pac tr7.  I have installed these before and it is supposed to be factory set for this feature.  I hooked everything up properly and it didn't bypass the lockout.   I decided I would go ahead and manually program it.  So I put the programming switch to "on" and pulsed it 2 times.  The light turned on when I touched the orange wire to ground but after waiting three seconds the unit did not flash twice to confirm that it accepted the programming and it still will not bypass the lockout.  Am I doing something wrong or could this unit be faulty? 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Monday, September 25, 2017 • Copyright © 1999-2017 Donate to Advertising Top of Page
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information. spacer spacer spacer
Donate to
Top spacer spacer