my first fiberglass box

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / my first fiberglass box (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

pcana11

Copper - Posts: 116

Joined: June 10, 2009

Location: Georgia, United States

Posted: September 21, 2009 at 7:52 PM / IP Logged

alright, thanks ianarian, and when i mix the filler, should i mix it with fiberglass resin also or just apply it by itself

Back to Top

briankmizell

Member - Posts: 28

Joined: December 05, 2009

Location: Arkansas, United States

Posted: December 29, 2009 at 11:44 PM / IP Logged

Most people mix resin with the filler so it will flow out easier.

It tends to get quite messy doing it that way so you can do it with out if you like. Just make sure that when you apply the filler you wipe it donw nice and firm with the spreader so it wll adhear good.

I cant give you an exact measure on how much resin to put, but my guess would be 3 parts filler 1 part resin.

Back to Top

pcana11

Copper - Posts: 116

Joined: June 10, 2009

Location: Georgia, United States

Posted: December 30, 2009 at 10:47 AM / IP Logged

thanks brian, but me and one of my friends finished that box, it turned out very nqice being my first fg job. sounds great too. but thanks for the input, ill remember it on my next fg project

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

my first fiberglass box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.