2010 fusion/milan factory alarm inputs?

Home / the12volt's Install Bay / Car Security and Convenience / 2010 fusion/milan factory alarm inputs? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

angelars

Copper - Posts: 176

Joined: November 06, 2006

Location: United States

Posted: November 08, 2009 at 8:36 PM / IP Logged

Installing a Viper 5902 into a 2010 Mercury Milan (but the Ford Fusion has the same wiring).

Door lock/unlock, illuminated entry, and parking light flash are all via a button on the ignition key (for the factory PATS alarm).

The Viper 5901/5902 has OEM factory alarm/disarm wires (H2/1 and H2/3).

What wires on the Milan/Fusion do we tap into, so that we can control the factory alarm via the Viper alarm?

Back to Top

big sexy lac

Copper - Posts: 153

Joined: November 01, 2007

Location: Illinois, United States

Posted: November 08, 2009 at 10:01 PM / IP Logged

Factory alarm arm - arms on lock with door open

Factory alarm disarm - factory remote only

Disarm no unlock - pats transponder & ignition

Keysense - blue/gray +

That's all I have hope it helps

well?

Back to Top

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: November 09, 2009 at 1:32 AM / IP Logged

According to Audiovox, disarm should be yellow/gray (-) at the SJB. They're also showing lock as blue (-) at the SJB, and LF door as GREEN/ violet (-) also at SJB; however if I remember right the door trigger might be an open state. Meter to verify, as always.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Back to Top

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 fusion/milan factory alarm inputs?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.