08 honda accord

Home / the12volt's Install Bay / Car Security and Convenience / 08 honda accord (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ruki101

Copper - Posts: 65

Joined: August 15, 2006

Location: United States

Posted: December 15, 2009 at 5:48 PM / IP Logged

Hello everyone!

[DOORLOCKS] I will be installing a RS with keyless on 08 Accord and I want to know if there's a way around on getting the doorlock wires other than the door itself.
[TACH OUTPUT] In my previous installs, usually get the tach output right at the cluster gauge with comparing the signal from the tach test port at the engine bay (in between 6 - 6.7 VAC). I'm not sure if I can still do this with the newer models. I only ask because I don't really want to drill a hole at the firewall especially if i can get the hood pin switch wire underdash.

Any input will be much appreciated.

Thanks!

Just About Anything Sparks

Back to Top

cmk0808ny

Copper - Posts: 203

Joined: June 02, 2007

Posted: December 15, 2009 at 7:29 PM / IP Logged

you can buy a can module that will give you a lot- door lock, trigger, trunk, brake, tach, hoodpin. it will save you from going in the door and extra wiring. use d2d on the module and get a r/s with it.

Back to Top

ruki101

Copper - Posts: 65

Joined: August 15, 2006

Location: United States

Posted: December 16, 2009 at 5:32 AM / IP Logged

cmk0808ny wrote:

you can buy a can module that will give you a lot- door lock, trigger, trunk, brake, tach, hoodpin. it will save you from going in the door and extra wiring. use d2d on the module and get a r/s with it.

I will actually going to ask this one. I just came across with iDATALink (ADS-AL CA) and I want to know if those additional feature (doorlocks, disarm, etc) list really works. It should be, I'm just making sure before purchasing this unit.

Thanks for the follow up "cmk0808ny"...

Just About Anything Sparks

Back to Top

cmk0808ny

Copper - Posts: 203

Joined: June 02, 2007

Posted: December 16, 2009 at 7:33 AM / IP Logged

it will do what you want

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: December 16, 2009 at 12:47 PM / IP Logged

ADS AL CA should work fine... tach may be iffy depending on what brand of unit you are installing......

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

ruki101

Copper - Posts: 65

Joined: August 15, 2006

Location: United States

Posted: December 16, 2009 at 5:45 PM / IP Logged

@cmk,

Thanks for the confirmation.

@kgerry,

I always use Ultra Starter and for this car, I've picked the U1280XR model.

Thanks for the inputs!!

Just About Anything Sparks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

08 honda accord

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.