secure lock

Home / the12volt's Install Bay / Car Security and Convenience / secure lock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rfwave

Copper - Posts: 120

Joined: November 06, 2006

Location: Alberta, Canada

Posted: December 28, 2009 at 10:12 PM / IP Logged

I am installing a remote starter on a Lexus 300. I am using a secure lock to disarm the factory alarm.

This means the vechicle has to be unlocked first to remote start and then lock after engine starts.

My question is do I have to connect the disarm and arm wires from remote starter together with the unlock and lock wires?

Thanks in advance.

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: December 28, 2009 at 10:18 PM / IP Logged

What system you are installing would help. From the sounds of it its in the autostart family (prostart, command start and so on) if so then no

Back to Top

rfwave

Copper - Posts: 120

Joined: November 06, 2006

Location: Alberta, Canada

Posted: December 29, 2009 at 7:30 PM / IP Logged

its Prostart . Yes its worked !

Thanks to you CHADWA .

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

secure lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.