Clifford Wiper and Sunroof Wiring on Acura Integra

I have a Clifford AvantGaurd 4 alarm, and I need to do an install on an 1998 Acura Integra LS.  The wires I'm having trouble wiring the sunroof to open and close with the auxilary output that grounds for a preset amount of time.  Also for the wiper input and output, which ones should I use coming from the wiper switch? 

Thanks

• IF you are wanting to open and close the sunroof via remote control you will need to add window modules and each module will need it's own ( - ) trigger from the alarm.
• As far as the wipers go you need to use both wires ( BLUE & BLUE / YELLOW ) and diode isolate each wire form the alarm using a 4001 diode. You can get these at any electronics stor or Radio Shack.
• The sunroof wires are :
• CLOSE : GREEN/ YELLOW
• OPEN : GREEN/ RED