kia cerato forte ex with dei 530t

Home / the12volt's Install Bay / Car Security and Convenience / kia cerato forte ex with dei 530t (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

sneakycyber

Silver - Posts: 413

Joined: September 13, 2005

Location: United States

Posted: February 28, 2010 at 12:25 PM / IP Logged

Check the status of the AUX 1 wire it needs to be pulsed or validity I just installed the system in my car. Also check the wire with a DMM or test light and make sure it goes to ground when you press the button.

Back to Top

genexis

Copper - Posts: 50

Joined: January 03, 2010

Location: Singapore

Posted: March 02, 2010 at 8:47 AM / IP Logged

I've did some trouble shooting and realized that the car needs to be disarmed before you can remotely wind the window down.

Anyway, where is a video of my installations so far.

http://www.#.com/watch?v=824gwNfgil0

How do i embed a video?

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kia cerato forte ex with dei 530t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.