pkall and toyota fj cruiser 2008 5901

Home / the12volt's Install Bay / Car Security and Convenience / pkall and toyota fj cruiser 2008 5901 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: February 27, 2010 at 2:17 AM / IP Logged

Hello friends ,

Led stay on when button is released . D2D is used .

I installed pkall as described in xpresskit guide .

Any idea ............

Thanks for answering, rcavictor.

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: February 27, 2010 at 3:27 PM / IP Logged

Hello ,

Found here :

... hook up the ground when running wire (GWR) AFTER you are done programming ...

Any idea ..........

Thanks for answering, rcavictor.

bambam3030

Member - Posts: 19

Joined: February 05, 2010

Location: Northwest Territories, United States

Posted: February 27, 2010 at 5:17 PM / IP Logged

try wire to wire data to data sometimes has problems. I never use it.

bam

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: February 27, 2010 at 5:53 PM / IP Logged

Hello friends ,

Ground to black wire , and 12v. to blue . Is it full time , or switched by what ?

Thanks for answering, rcavictor.

bambam3030

Member - Posts: 19

Joined: February 05, 2010

Location: Northwest Territories, United States

Posted: February 27, 2010 at 6:10 PM / IP Logged

12v constant to the blue

bam

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: February 27, 2010 at 7:17 PM / IP Logged

bambam3030 wrote:

12v constant to the blue

Hello friends ,

My question is :

Constant 12v. means vehicle is ready to start anytime , or easy to steal ..........?

Please explain .........

Thanks for answering, rcavictor.

bambam3030

Member - Posts: 19

Joined: February 05, 2010

Location: Northwest Territories, United States

Posted: February 27, 2010 at 7:21 PM / IP Logged

12v constant to the blue wire on the pkall so that the moduel has power all the time so it will work and lock and ulock your doors make your door trigger work and remote start work.

bam

bambam3030

Member - Posts: 19

Joined: February 05, 2010

Location: Northwest Territories, United States

Posted: February 27, 2010 at 7:23 PM / IP Logged

this doesnt make your car easy to steal when you push the remote start wire it sends a signal to bypass your factory anti theft alowing for the car to start and locks etc.....

bam

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: February 27, 2010 at 7:44 PM / IP Logged

Hello friends ,

Thanks again for explanations . I agree that it is in the installation guide . I will try this tomorrow .

Thanks for answering, rcavictor.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pkall and toyota fj cruiser 2008 5901

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.