spacer spacer spacer spacer

clifford gp1000t bike alarm

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: March 31, 2010
Location: United Kingdom
Posted: April 18, 2010 at 1:16 PM / IP Logged  

Can you please help me i am trying to fit a gp1000t alarm to my yzf600r bike

and i can not get it to work fully in the install pdf the yellow wire says

Yellow ignition input (+)12 V

Connect this wire to any ignition wire on the motorcycle that remains positive while

the starter button is pressed. It will report on zone 6 if triggered when armed. when i do this the alarm activates when i turn the key to on

When alarm is off

Silver - Posts: 700
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: May 30, 2010 at 1:54 PM / IP Logged  
The alarm will not trigger when it is disarmed. You need to make sure it's disarmed before you turn the bike on.
Copper - Posts: 164
Copper spacespace
Joined: June 02, 2010
Location: Florida, United States
Posted: June 02, 2010 at 11:52 PM / IP Logged  

usually Clifford is 2 chirps-armed 1 chirp -disarm

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, June 9, 2023 • Copyright © 1999-2023, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer