97 eclipse remote starter

Home / the12volt's Install Bay / Car Audio / 97 eclipse remote starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mitsu79

Member - Posts: 32

Joined: January 24, 2010

Location: Connecticut, United States

Posted: June 24, 2010 at 10:34 AM / IP Logged

hi guy, here the situation, 97 eclipse..the car only start with the remote starter..wont start or crank with the key?? can it be the ignition harness?? thanks

91stt

Silver - Posts: 564

This member consistently provides reliable information

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 24, 2010 at 10:56 AM / IP Logged

Do you have an aftermarket security system installed?

Was the remote start recently installed?

Possible cause can be a bad ignition switch or an open in the starter wire.

If there is a starter interrupt/anti-grind relay installed, it may have a bad connection or the relay is has gone bad.

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

mitsu79

Member - Posts: 32

Joined: January 24, 2010

Location: Connecticut, United States

Posted: June 24, 2010 at 12:29 PM / IP Logged

the avital 4103 remote starter..it's in the car for 5 months...everything was fine until last week..the car still start up and drive but with the remote starter only..

mitsu79

Member - Posts: 32

Joined: January 24, 2010

Location: Connecticut, United States

Posted: June 24, 2010 at 12:32 PM / IP Logged

i took the starter out and the car won't start either..the ac is on, radio is on. light on the cluster is on..but won't crank...it can't be the starter on the car because it start with the remote.thanks

91stt

Silver - Posts: 564

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 24, 2010 at 12:54 PM / IP Logged

Did you install it yourself or had a shop do it?

If a shop did it, have them troubleshoot it.

With the information thus far, I still suspect an open in the starter wire.

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

91stt

Silver - Posts: 564

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 24, 2010 at 1:45 PM / IP Logged

to clarify, I am referring to the start wire from the ignition switch

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

mitsu79

Member - Posts: 32

Joined: January 24, 2010

Location: Connecticut, United States

Posted: June 24, 2010 at 2:23 PM / IP Logged

the ign harness rite?

91stt

Silver - Posts: 564

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 24, 2010 at 4:06 PM / IP Logged

Did you install the remote start on your own?

How did you tap into the start wire in the ignition harness?

Did you cut the wire?

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 eclipse remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.