the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avistart 6501 on accord 2000


Post ReplyPost New Topic
< Prev Topic Next Topic >
sequoia2006 
Copper - Posts: 63
Copper spacespace
Joined: July 13, 2010
Location: Washington, United States
Posted: September 25, 2010 at 1:20 AM / IP Logged  
I also noticed that the voltage on the violet is around 1V without load or connecting to the starter wire (starter side) but when it's connected then the voltage is 0V and 12V+ when starting.
sequoia2006 
Copper - Posts: 63
Copper spacespace
Joined: July 13, 2010
Location: Washington, United States
Posted: September 25, 2010 at 1:22 AM / IP Logged  
The car also seemed to remotely started as it should. First the accessories are on, then the starter was cranked, but then the D4 light flashes constantly.
sequoia2006 
Copper - Posts: 63
Copper spacespace
Joined: July 13, 2010
Location: Washington, United States
Posted: September 25, 2010 at 1:32 AM / IP Logged  
There was another code that I read out of the scanner when I switched the scanner settings to Honda specific code. The code was P0700 which basically is something wrong with the transmission control system so that was not useful.
91stt 
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: September 25, 2010 at 1:40 AM / IP Logged  
meter the wires to make sure the r/s unit is powering the wires as if you were using the key. it does not matter if it start as it should. the problem is the way the r/s is starting the car. if the r/s is not powering the electronics properly, you may get service lights.
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
sequoia2006 
Copper - Posts: 63
Copper spacespace
Joined: July 13, 2010
Location: Washington, United States
Posted: September 25, 2010 at 2:07 AM / IP Logged  
I will check the voltage on those wires during key start and compare with the voltage during remote start.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer