the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Problems Programming Autostart Remote


Post ReplyPost New Topic
< Prev Topic Next Topic >
toni-o 
Member - Posts: 8
Member spacespace
Joined: September 11, 2010
Location: Nebraska, United States
Posted: September 22, 2010 at 9:12 AM / IP Logged  

No it didn't start.  It starts with the key very fast, but the remote only makes it crank.  Maybe I havent programmed the functions on the remote buttons correctly.

tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: September 22, 2010 at 12:12 PM / IP Logged  

if you have a key in the ignition barrel but not turned to on, and it starts via rs, you have a bypass problem.

but on that note make sure you have the start wires pwered up. some forget to power them up

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
toni-o 
Member - Posts: 8
Member spacespace
Joined: September 11, 2010
Location: Nebraska, United States
Posted: September 23, 2010 at 8:12 AM / IP Logged  
yes i tried that, i put the key in without turning and tried to remote start it, but nothing.  And the start wires are connected.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: September 23, 2010 at 12:55 PM / IP Logged  

you must be missing some ignition or acc wire.

have u programmed tach?

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
toni-o 
Member - Posts: 8
Member spacespace
Joined: September 11, 2010
Location: Nebraska, United States
Posted: September 29, 2010 at 3:28 PM / IP Logged  

Hey fellas, i untaped the bypass module from the autostart and on the back it shows you how to do a reset.  I turned the key to ON position and held the reset button on the bypass and the light on the bypass came on.  After the i tried to start it with the remote and wallah!  It started right up....just in time for cold weather!  Thanks everybody!

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer