2010 audi s4 remote start wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2010 audi s4 remote start wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: September 23, 2010 at 1:47 PM / IP Logged

Hello, I'm wondering if anyone has the wiring info for me to install a remote starter system into a 2010 audi S4. this does not have the push button start. also if anyone has any tips fo rthis car would be greatly welcomed lol

Tri County KustomZ

certified installer

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 23, 2010 at 5:03 PM / IP Logged

Sorry but I have a tip in two parts, RUN! If not it's all CAN systems, don't even think about hard wiring.

Back to Top

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: September 23, 2010 at 5:58 PM / IP Logged

are they really that bad? i've got installer companion here and for the 2008 S4 didn't look to bad..a little bit of work with the bypass. but i guess until i see the wiring needed wont know lol but that's for the tip anyway

Tri County KustomZ

certified installer

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 24, 2010 at 1:33 AM / IP Logged

Door, trunk and hood triggers + locking are at the rear right in the lock/alarm control box, if you can find a control unit from Fortin etc. that does the locks, by-pass etc. you're on a winner

Back to Top

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: September 24, 2010 at 8:08 AM / IP Logged

alright thanks....i was planning on useing the idatalink bypass...according to the site it does all the door locks and such....i don't suppose you've got the wiring info fo rthe car? i also forgot to mention it's a standard

Tri County KustomZ

certified installer

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 24, 2010 at 9:21 AM / IP Logged

No sorry, your general wiring should be the same but I'll bet the CAN protocols have changed so make sure the by-pass is bang up to date, also if your by-pass is the key in the box type, make sure you obtain the black plastic valet key and that it's programmed to that vehicle.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 audi s4 remote start wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.