ford remote start 09 ford escape

Hey all, Installing a Ford add-on remote start system *which I haven't bought yet but is listed below* I'm trying to find a wiring diagram for a 2009 ford escape. I see one for a 2006 here in the forums, but I'm not sure if that is different from my year. Help! 2009-2010 Ford Escape Remote Start Systems Remote Start "101", Includes Two 1-Button Keyfobs and Securilok Interface Kit #4 (7L2Z-19G365-AA)remember, you can improve your lie in the rough, only if you can roughly prove you're not lying

Looks like 2008 thru 2010 are the same.  Here is a link to Bulldog Security :  http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

Here is a link to Audiovox :  http://techservices.audiovox.com/Login.aspx   Sign-up is free.

PM me if you want the entire 2010 Ford Install guide.  ( 3.3 MB.  Too big to post. )

Soldering is fun!

it's the same as 2008+ except positive parking lights are not in the dkp as stated

I tested just about every wire in the driver kick of an 08 escape looking for that + parking light wire.  It's easy to pop the shifter trim bezel, then the whole cup holder assembly and get + parking lights right on top in front of the shifter.  You can get brake and door locks in the driver kick.  When you remove the column look above the ignition harness and the transponder(rx,tx) are loomed looping over top the column.  If you decide to run a hoodpin you can pop out 1 of those plastic retainers that phillips screw in on the cowl and jam it right there.  It works everytime.Advanced

its in the driver kick harness from the harness that comes from under the driver seat top the rear of car

Next 1 I get I shall look for it, thanks for the hot lead Advanced

Thanks for the info guys- I should be taking this on next week!remember, you can improve your lie in the rough, only if you can roughly prove you're not lying

Its a very easy car to do. I do it in 45 mins or less.

Hey Cmk, What bypass kit did you use or do you suggest??? I have an 09 coming up for a friend and I think I want the PKALL but not certain... Talent421

im cmk0808--- i would use the idatalink adstb bypass. i use compustar and idatalink now.